Started wather station

C++/Arduino/Tempsensor/Tempsensor.ino

@@ -1,41 +1,21 @@
-// Include the libraries we need
 #include <OneWire.h>
 #include <DallasTemperature.h>
 
-// Data wire is plugged into port 2 on the Arduino
-#define ONE_WIRE_BUS 2
-
-// Setup a oneWire instance to communicate with any OneWire devices (not just Maxim/Dallas temperature ICs)
+#define HIGH_PIN 12
+#define ONE_WIRE_BUS 13
 OneWire oneWire(ONE_WIRE_BUS);
 
-// Pass our oneWire reference to Dallas Temperature. 
 DallasTemperature sensors(&oneWire);
 
-/*
- * The setup function. We only start the sensors here
- */
-void setup(void)
-{
-  // start serial port
-  Serial.begin(9600);
-  Serial.println("Dallas Temperature IC Control Library Demo");
-
-  // Start up the library
+void setup() {
+  pinMode(HIGH_PIN, OUTPUT);
+  digitalWrite(HIGH_PIN, HIGH);
+  Serial.begin(115200);
   sensors.begin();
 }
 
-/*
- * Main function, get and show the temperature
- */
-void loop(void)
-{ 
-  // call sensors.requestTemperatures() to issue a global temperature 
-  // request to all devices on the bus
-  Serial.print("Requesting temperatures...");
-  sensors.requestTemperatures(); // Send the command to get temperatures
-  Serial.println("DONE");
-  // After we got the temperatures, we can print them here.
-  // We use the function ByIndex, and as an example get the temperature from the first sensor only.
-  Serial.print("Temperature for the device 1 (index 0) is: ");
+void loop() { 
+  sensors.requestTemperatures();
   Serial.println(sensors.getTempCByIndex(0));  
 }
+