Speed up builds by referencing github zips for shallow checkouts (#6441)

* Speed up builds by referencing github zips for shallow checkouts * sadly the zips don't include submodules OR submodule metadata
2025-03-29 12:19:05 +01:00
parent 0491c890d7
commit ea9485657e
33 changed files with 55 additions and 57 deletions
--- a/variants/CDEBYTE_E77-MBL/platformio.ini
+++ b/variants/CDEBYTE_E77-MBL/platformio.ini
@@ -1,7 +1,5 @@
 [env:CDEBYTE_E77-MBL]
 extends = stm32_base
-; `ebyte_e77_dev` was added in this commit. Remove when a new release is used in the base.
-platform = https://github.com/platformio/platform-ststm32.git#3208828db447f4373cd303b7f7393c8fc0dae623
 board = ebyte_e77_dev
 board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
 board_level = extra
--- a/variants/MakePython_nRF52840_eink/platformio.ini
+++ b/variants/MakePython_nRF52840_eink/platformio.ini
@@ -11,7 +11,7 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/MakePython_nRF52840_eink -
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/MakePython_nRF52840_eink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  zinggjm/GxEPD2@^1.6.2
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4
--- a/variants/MakePython_nRF52840_oled/platformio.ini
+++ b/variants/MakePython_nRF52840_oled/platformio.ini
@@ -7,5 +7,5 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/MakePython_nRF52840_oled -
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/MakePython_nRF52840_oled>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
 debug_tool = jlink
--- a/variants/crowpanel-esp32s3-5-epaper/platformio.ini
+++ b/variants/crowpanel-esp32s3-5-epaper/platformio.ini
@@ -24,7 +24,7 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

 [env:crowpanel-esp32s3-4-epaper]
 extends = esp32s3_base
@@ -52,7 +52,7 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

 [env:crowpanel-esp32s3-2-epaper]
 extends = esp32s3_base
@@ -80,4 +80,4 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
--- a/variants/heltec_mesh_node_t114/platformio.ini
+++ b/variants/heltec_mesh_node_t114/platformio.ini
@@ -14,4 +14,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_node
 lib_deps = 
  ${nrf52840_base.lib_deps}
  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/st7789#bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f
+  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
--- a/variants/heltec_vision_master_e213/platformio.ini
+++ b/variants/heltec_vision_master_e213/platformio.ini
@@ -16,7 +16,7 @@ build_flags =
  -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

--- a/variants/heltec_vision_master_e290/platformio.ini
+++ b/variants/heltec_vision_master_e290/platformio.ini
@@ -20,7 +20,7 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#448c8538129fde3d02a7cb5e6fc81971ad92547f
+  https://github.com/meshtastic/GxEPD2/archive/448c8538129fde3d02a7cb5e6fc81971ad92547f.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

--- a/variants/heltec_vision_master_t190/platformio.ini
+++ b/variants/heltec_vision_master_t190/platformio.ini
@@ -9,5 +9,5 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/st7789#bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f
+  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
 upload_speed = 921600
--- a/variants/heltec_wireless_paper/platformio.ini
+++ b/variants/heltec_wireless_paper/platformio.ini
@@ -17,7 +17,7 @@ build_flags =
  -D EINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

--- a/variants/heltec_wireless_paper_v1/platformio.ini
+++ b/variants/heltec_wireless_paper_v1/platformio.ini
@@ -15,6 +15,6 @@ build_flags =
  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200
--- a/variants/meshlink/platformio.ini
+++ b/variants/meshlink/platformio.ini
@@ -23,7 +23,7 @@ build_flags = ${nrf52840_base.build_flags} -I variants/meshlink -D MESHLINK
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/meshlink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
--- a/variants/meshlink_eink/platformio.ini
+++ b/variants/meshlink_eink/platformio.ini
@@ -23,7 +23,7 @@ build_flags = ${nrf52840_base.build_flags} -I variants/meshlink_eink -D MESHLINK
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/meshlink_eink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
--- a/variants/monteops_hw1/platformio.ini
+++ b/variants/monteops_hw1/platformio.ini
@@ -9,7 +9,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/monteops_hw1> +<
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/radiomaster_900_bandit/platformio.ini
+++ b/variants/radiomaster_900_bandit/platformio.ini
@@ -13,4 +13,4 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
  ${esp32_base.lib_deps}
-  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1
+  https://github.com/gjelsoe/STK8xxx-Accelerometer/archive/v0.1.1.zip
--- a/variants/rak11310/platformio.ini
+++ b/variants/rak11310/platformio.ini
@@ -15,6 +15,6 @@ lib_deps =
  ${rp2040_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
 debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rak2560/platformio.ini
+++ b/variants/rak2560/platformio.ini
@@ -15,7 +15,7 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/beegee-tokyo/RAK-OneWireSerial.git#0.0.2
+  https://github.com/beegee-tokyo/RAK-OneWireSerial/archive/0.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/rak4631/platformio.ini
+++ b/variants/rak4631/platformio.ini
@@ -17,9 +17,9 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  https://github.com/RAKWireless/RAK12034-BMX160.git#dcead07ffa267d3c906e9ca4a1330ab989e957e2
+  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip

 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
@@ -41,7 +41,7 @@ build_flags =

 lib_deps =
  ${env:rak4631.lib_deps}
-  https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
+  https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip

 ; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
 ; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
--- a/variants/rak4631_eth_gw/platformio.ini
+++ b/variants/rak4631_eth_gw/platformio.ini
@@ -27,9 +27,9 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  https://github.com/meshtastic/RAK12034-BMX160.git#4821355fb10390ba8557dc43ca29a023bcfbb9d9
+  https://github.com/meshtastic/RAK12034-BMX160/archive/4821355fb10390ba8557dc43ca29a023bcfbb9d9.zip
  bblanchon/ArduinoJson @ 6.21.4
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
@@ -51,7 +51,7 @@ build_flags =

 lib_deps =
  ${env:rak4631_eth_gw.lib_deps}
-  https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
+  https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip

 ; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
 ; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
--- a/variants/rak_wismeshtap/platformio.ini
+++ b/variants/rak_wismeshtap/platformio.ini
@@ -18,7 +18,7 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
  bodmer/TFT_eSPI
  beegee-tokyo/RAKwireless RAK12034@^1.0.0
--- a/variants/seeed-sensecap-indicator/platformio.ini
+++ b/variants/seeed-sensecap-indicator/platformio.ini
@@ -2,7 +2,7 @@
 [env:seeed-sensecap-indicator]
 extends = esp32s3_base
 platform_packages =
-    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32.git#aef7fef6de3329ed6f75512d46d63bba12b09bb5 ; add_tca9535 (based on 2.0.16)
+    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)

 board = seeed-sensecap-indicator
 board_check = true
@@ -24,7 +24,7 @@ build_flags = ${esp32_base.build_flags}
  -DUSE_ARDUINO_HAL_GPIO

 lib_deps = ${esp32s3_base.lib_deps}
-  https://github.com/mverch67/LovyanGFX#4c76238c1344162a234ae917b27651af146d6fb2
+  https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
  earlephilhower/ESP8266Audio@^1.9.9
  earlephilhower/ESP8266SAM@^1.0.1

@@ -70,4 +70,4 @@ build_flags =
 lib_deps =
  ${env:seeed-sensecap-indicator.lib_deps}
  ${device-ui_base.lib_deps}
-  https://github.com/mverch67/bb_captouch.git#8626412fe650d808a267791c0eae6e5860c85a5d ; alternative touch library supporting FT6x36
+  https://github.com/mverch67/bb_captouch/archive/8626412fe650d808a267791c0eae6e5860c85a5d.zip ; alternative touch library supporting FT6x36
--- a/variants/t-echo/platformio.ini
+++ b/variants/t-echo/platformio.ini
@@ -20,7 +20,7 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/t-echo
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/t-echo>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
  lewisxhe/PCF8563_Library@^1.0.1
 ;upload_protocol = fs

--- a/variants/t-eth-elite/platformio.ini
+++ b/variants/t-eth-elite/platformio.ini
@@ -14,4 +14,4 @@ lib_ignore =

 lib_deps = 
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/ETHClass2#v1.0.0
+  https://github.com/meshtastic/ETHClass2/archive/v1.0.0.zip
--- a/variants/tlora_t3s3_epaper/platformio.ini
+++ b/variants/tlora_t3s3_epaper/platformio.ini
@@ -15,4 +15,4 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
--- a/variants/tracker-t1000-e/platformio.ini
+++ b/variants/tracker-t1000-e/platformio.ini
@@ -9,7 +9,7 @@ board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/tracker-t1000-e>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/QMA6100P_Arduino_Library.git#14c900b8b2e4feaac5007a7e41e0c1b7f0841136
+  https://github.com/meshtastic/QMA6100P_Arduino_Library/archive/14c900b8b2e4feaac5007a7e41e0c1b7f0841136.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil