diff --git a/cases/swweeep/README.md b/cases/swweeep/README.md
index cdffcf0..1708c51 100644
--- a/cases/swweeep/README.md
+++ b/cases/swweeep/README.md
@@ -29,11 +29,11 @@ However, given you can store the battery on top, you can use the thin bottom bot
 
 ### swweeep-bot-left
 
-This is a thin bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. Only use this plate if you have a 3mm thick battery. If your battery is 4mm thick, please use the `swweeep-bot-3mm-left` plate.
+This is a thin bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. Only use this plate if you have a 3mm thick battery and you are not using a JST connector. Otherwise, please use the `swweeep-bot-3mm-left` plate.
 
 ### swweeep-bot-3mm-left
 
-This is a thin bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. As mentioned above, made to give a little extra room for a 4mm-4.5mm thick battery.
+This is a thin bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. As mentioned above, made to give a little extra room for a 4mm-4.5mm thick battery and/or a JST connector.
 
 ### swweeep-bot-widecover-left
 
@@ -41,13 +41,13 @@ This is a thin bottom plate, intended to be used with `swweeep-body-covered-wide
 
 ### swweeep-bot-widecover-3mm-left
 
-This is a thin bottom plate, intended to be used with `swweeep-body-covered-widecover-left`. I added this for good consistency, but it's unlikely you'd use this one. The only reason to use this bottom plate is that you are using the `swweeep-body-covered-widecover-left` body, not putting the battery next to the controller, and you have a 4mm thick battery.
+This is a thin bottom plate, intended to be used with `swweeep-body-covered-widecover-left`. I added this for good consistency, but it's unlikely you'd use this one. The only reason to use this bottom plate is that you are using the `swweeep-body-covered-widecover-left` body, not putting the battery next to the controller, and you have a 4mm thick battery or are using a JST connector.
 
 ### swweeep-bot-10deg-battery-small
 
-This is a 10 degree tented bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. There is a small battery compartment in the tent to put your battery. Fits a 4mm thick 110 mah battery, up to 12mm x 33mm
+This is a 10 degree tented bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. There is a small battery compartment in the tent to put your battery. Fits a 4mm thick 110 mah battery, up to 12mm x 33mm. Note that if you are using a JST connector, you should use the `swweeep-bot-10deg-battery-large` bottom plate. The positioning of the hole for this one is a bit off to the left, and the JST requires more space between the PCB and the plate.
 
 ### swweeep-bot-10deg-battery-large
 
-This is a 10 degree tented bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. There is a large battery compartment in the tent to put your battery. Fits a battery up to 30mm x 54mm x 10mm
+This is a 10 degree tented bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. There is a large battery compartment in the tent to put your battery. Fits a battery up to 30mm x 52mm x 8mm
 
diff --git a/cases/swweeep/swweeep-bot-10deg-battery-large.stl b/cases/swweeep/swweeep-bot-10deg-battery-large.stl
index 1086eb4..a5351a2 100644
Binary files a/cases/swweeep/swweeep-bot-10deg-battery-large.stl and b/cases/swweeep/swweeep-bot-10deg-battery-large.stl differ