benkyd/sweep36
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

moved the hole closer to the edge to allow space for the JST connector to go in

Browse Source
This commit is contained in:
Sadek Baroudi
2022-11-16 03:07:02 -08:00
parent ad49181e82
commit efbf4c6ee6
2 changed files with 5 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

10
cases/swweeep/README.md
View File

@@ -29,11 +29,11 @@ However, given you can store the battery on top, you can use the thin bottom bot
### swweeep-bot-left
This is a thin bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. Only use this plate if you have a 3mm thick battery. If your battery is 4mm thick, please use the `swweeep-bot-3mm-left` plate.
This is a thin bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. Only use this plate if you have a 3mm thick battery and you are not using a JST connector. Otherwise, please use the `swweeep-bot-3mm-left` plate.
### swweeep-bot-3mm-left
This is a thin bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. As mentioned above, made to give a little extra room for a 4mm-4.5mm thick battery.
This is a thin bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. As mentioned above, made to give a little extra room for a 4mm-4.5mm thick battery and/or a JST connector.
### swweeep-bot-widecover-left
@@ -41,13 +41,13 @@ This is a thin bottom plate, intended to be used with `swweeep-body-covered-wide
### swweeep-bot-widecover-3mm-left
This is a thin bottom plate, intended to be used with `swweeep-body-covered-widecover-left`. I added this for good consistency, but it's unlikely you'd use this one. The only reason to use this bottom plate is that you are using the `swweeep-body-covered-widecover-left` body, not putting the battery next to the controller, and you have a 4mm thick battery.
This is a thin bottom plate, intended to be used with `swweeep-body-covered-widecover-left`. I added this for good consistency, but it's unlikely you'd use this one. The only reason to use this bottom plate is that you are using the `swweeep-body-covered-widecover-left` body, not putting the battery next to the controller, and you have a 4mm thick battery or are using a JST connector.
### swweeep-bot-10deg-battery-small
This is a 10 degree tented bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. There is a small battery compartment in the tent to put your battery. Fits a 4mm thick 110 mah battery, up to 12mm x 33mm
This is a 10 degree tented bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. There is a small battery compartment in the tent to put your battery. Fits a 4mm thick 110 mah battery, up to 12mm x 33mm. Note that if you are using a JST connector, you should use the `swweeep-bot-10deg-battery-large` bottom plate. The positioning of the hole for this one is a bit off to the left, and the JST requires more space between the PCB and the plate.
### swweeep-bot-10deg-battery-large
This is a 10 degree tented bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. There is a large battery compartment in the tent to put your battery. Fits a battery up to 30mm x 54mm x 10mm
This is a 10 degree tented bottom plate, intended to be used with `swweeep-body-covered-left` or `swweeep-body-open-left`. There is a large battery compartment in the tent to put your battery. Fits a battery up to 30mm x 52mm x 8mm

BIN
cases/swweeep/swweeep-bot-10deg-battery-large.stl
View File

Binary file not shown.